Production descriptions:
Carbon Monoxide (CO) is one of the most dangerous gases you can encounter, because it is colorless and odorless. You cannot afford to take chances with your well-being and that is why the BWC2-M is a popular choice for portable CO detection today. The BWC2-M is built to give you a full 24 months of dependable and reliable service, and it is one of the easiest gas monitors to use and maintain. It never needs batteries or a new sensor. Low alarm level is 35 ppm and at 200ppm you receive a high alarm (default settings).
Your two year gas monitor can last for as long as three years. For example, if it is in storage for three months, its life is extended by three more months.
Do you use a MicroDock system or Fleet Manager II software? Your BWC2-M will be a welcome addition. Plus, when used with IntelliDoX systems, you receive these benefits:
- Adjustable parameters and alarms
- Rapid bump tests
- Easy recordkeeping
- 5 sensors testing
Technology from BW Clip
The BWC2-M comes with two of the latest gas monitor technologies, Reflex Technology™ and Surecell™. Reflex Technology™ makes it possible for the BWC2-M to test itself each day, and thanks to Surecell™, you receive extremely fast performance. This provides improved safety and less downtime.Configuring the BWC2-M
There are no long and drawn out instructions or tasks to worry about, when you configure the BWC2M. Before activation you can place the high and low alarm set points where you want them. You can have the time of day at your fingertips and the gas monitor will let the user know when it's time for bump testing. You also can receive an alarm with each gas reading.Why Buy the BWC2-M?
Here are 7 good reasons to consider this well-made unit:· Very light and will not weigh you down
· Affordably priced
· No maintenance – works by pushing a button
· Loud 95 decibel alarm
· Can record the last 35 gas readings and bump tests
· Very tough - can withstand low temperatures and wet conditions
· The BWC2-M is smart. In fact, it tests its own sensor and battery
BW Clip Specifications
| Size | 1.6 x 2.0 x 3.4 in. / 4.1 x 5.0 x 8.7 cm |
| Weight | 3.2 oz. / 92 g |
| Temperature |
H2S: -40 to +122°F / -40 to +50°C CO: -22 to +122°F / -30 to +50°C O2: -4 to +122°F / -20 to +50°C SO2: -22 to +122°F / -30 to +50°C |
| Humidity | 5% - 95% RH (non-condensing) |
| Alarms | Visual, vibrating, audible (95 dB) • Low, High |
| Tests | Activated detectors automatically perform one internal diagnostic test every 24 hours. |
| Typical battery life | Two years (H2S, CO, O2 or SO2) or three years (H2S or CO) |
| Event logging | 35 most recent events |
| Ingress Protection | IP 66/67 |
| Warranty | Two or three years from activation (given normal operation), plus one year shelf life (6 months for O2). Up to three years for two-year H2S and CO detectors when used with the hibernation feature, limited to 24 months of detector operation. |
Sensor Specifications
|
Gas
|
Measuring Range
|
Low Alarm Level
|
High Alarm Level
|
| 2 or 3 year detector | |||
| H2S |
0 -100 ppm
|
10 ppm
|
15 ppm
|
| CO |
0 - 300 ppm
|
35 ppm
|
200 ppm
|
| 2 year detector only | |||
| O2 |
0 - 25.0 % by vol.
|
19.5 %
|
23.5 %
|
| SO2 |
0 - 100 ppm
|
5 ppm
|
10 ppm
|
----------------------------------
