Honeywell Sensepoint XCD ACCESSORIES S3KCAL Calibration cap

 

Sensepoint XCD

 

The Sensepoint XCD (exceed) range of fixed gas detectors is used to monitor areas where flammable, oxygen deficiency and toxic gases may pose a hazard to working environments. This advanced and versatile range of gas detectors monitors and indicates the presence of any one of a selection of toxic and flammable gases. Any user can instantly identify the operating status of XCD via its clear multi-function backlit display. Output signals available are industrial standard 4 to 20mA, three relay contacts and MODBUS digital. A magnetic wand allows non intrusive one person calibration, while a wide choice of accesories means XCD can be used in many applications.

Sensepoint XCD with Flammable and Primary Toxic Sensor Cartridge

A Sensepoint XCD KIT consists of Transmitter, Sensor socket, Sensor cartridge, Standard weather protection, Magnetic wand and Allen key.

 

Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors)

Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location. 

KIT includes Transmitter, Magnetic Wand and Allen Key

 

Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors)

Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors

such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored

from a convenient location.

KIT includes Transmitter, Magnetic Wand and Allen Key

Sensepoint XCD-RTD transmitter (use with oxygen and toxic Sensepoint sensors)

Sensepoint XCD-RTD (Remote Toxic Detector) allows for a gas sensor from a wider selection of 2-wire 4 to 20 mA input type Toxic and Oxygen sensors to be fitted directly to the transmitter housing, or wired remotely from another location. KIT includes Transmitter, Magnetic Wand and Allen Key

INSTRUMENT

Without Modbus

SPXCDALMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted LM25

SPXCDASMTX4 ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter, 2 x M20 Entries, 1 x M25 Entry, painted 316SS

SPXCDULNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted LM25

SPXCDUSNTX4 cCSAus approved SP XCD-RTD 4~20mA Input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS

With Modbus

SPXCDALMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted LM25

SPXCDASMTX4M ATEX, IECEx & AP approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, painted 316SS

SPXCDULNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25

SPXCDUSNTX4M cCSAus approved SP XCD-RTD 4~20mA Input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS

Note: Refer to "Sensepoint" pricelist for the new M25 for ATEX/IECEx and 3/4''NPT for cCSA threaded range of Sensepoint Toxic sensors that may be fitted directly to the 4-20mA input XCD-RTD transmitter.

Sensepoint XCD-RFD transmitter (use with Standard & Hi-Temp Sensepoint sensors)

Sensepoint XCD-RFD (Remote Flammable Detector) allows for remotely mounted flammable gas detectors such as Hi-Temperature version of Sensepint Flamable to be located in adverse applications and monitored from a convenient location. KIT includes Transmitter, Magnetic Wand and Allen Key

INSTRUMENT

Without Modbus

SPXCDALMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted LM25

SPXCDASMRFD ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 2 x M20 Entries,1 x M25 Entry,painted 316SS

SPXCDULNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted LM25

SPXCDUSNRFD cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter, 3 x 3/4'' NPT Entries, painted 316SS

With Modbus

SPXCDALMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited LM25

SPXCDASMRFDM ATEX, IECEx & AP approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 2 x M20 Entries, 1 x M25 Entry, paited 316SS

SPXCDULNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted LM25

SPXCDUSNRFDM cCSAus approved SP XCD-RFD Remote Flammable (Cat or IR) Sensor input Transmitter with MODBUS, 3 x 3/4'' NPT Entries, painted 316SS

Remote Flammable Sensor (XCD Sensor Cartridge + Socket Housing)

SPXCDXSRFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing

SPXCDXSRRXSS Methane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing

SPXCDXSRPXSS Propane IR 0-100%LEL (20,0 to 100.0%LEL, 10%LEL) Sensor Cartridge with Socket Housing

SPXCDXSRB1SS Carbon Dioxide IR 0-2.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing

SPXCDXSRB2SS Carbon Dioxide IR 0-5.00%VOL only with Socket Housing Sensor Cartridge with Socket Housing

00780-A-0100 Term Hsg-Bartec DE1155 With Continuity Plate 1x25mm- 3x20mm Entries (ATEX certified)

Sensepoint XCD

ACCESSORIES, CONSUMABLES & SPARES

ACCESSORIES

S3KCAL Calibration cap

SPXCDCC Collecting cone for use with lighter than air gases

SPXCDDMK Duct mounting kit

SPXCDMTBR Mounting bracket (inc. bolts, nuts, brackets)

SPXCDSDP Sunshade / Deluge Protection

SPXCDFH Flow Housing for Sample Panel

Consumables

SPXCDXSFXSS Flammable CAT 0-100%LEL (20,0 to 100.0%LEL)

SPXCDXSRXSS CH4(Methane) IR 0-100%LEL (20,0 to 100.0%LEL)

SPXCDXSPXSS C3H8 (Propane) IR 0-100%LEL (20,0 to 100.0%LEL)

SPXCDXSO1SS Oxygen 25.0%/Vol only

SPXCDXSHXSS Hydrogen Sulfide 0-50ppm (10.0 to 100.0ppm)

SPXCDXSCXSS Carbon Monoxide 0-300ppm (100 to 1000ppm)

SPXCDXSG1SS Hydrogen 0-1000ppm only

SPXCDXSNXSS Nitrogen Dioxide 10-50ppm (10.0 to 50.0ppm)

SPXCDXSB1SS Carbon Dioxide IR 0-2%VOL only

SPXCDXSB2SS Carbon Dioxide IR 0-5%VOL only

Spares (Miscellaneous)

SPXCDWP Sensepoint XCD Standard Weather Protection

SPXCDSRLS Sensor Retainer with locking screw

SPXCDAKS Allen key for stopper

SPXCDHWES Hex wrench for earth screw

SPXCDEBS Earth Bracket and Screws

SPXCDMAG Magnetic wand

SPXCDRSSH Sensor Socket Housing for XCD

SPXCDMBUS Replacement Modbus Module

SPXCDSERVK Service Kit, Including O-ring front cover (2 pieces), Terminal module screw (3 pieces), Earth screw and bracket (2 pieces), O-ring weather housing, O-ring cardridge retainer (2 pieces), O-ring on the cartridge (2 pieces), Locking screw for front cover and sensor retainer (2 pieces)

SPXCDTOOLK XCD Service Tool Kit, Including Magnet, Hex wrench for earth screw and Allen key for locking screws

SPXCDTMK XCD Terminals Kit, Including Terminal block for relays (green) and Terminal block power

SPXCDNPTP 3/4"NPT plug (Certified as part of Ex d enclosure)

SPXCDM20P M20 plug (Certified as part of Ex d enclosure)

Spares (Replacement Display Module)

Each replacement Display Module includes pre-configured PCB (for sensor and range), backlit LCD and plastic housing. The unit is a plug in replacement and simply requires confiiguration after fitting via the menu.

SPXCDDMT Replacement display module for O2 & Toxic

SPXCDDMF Replacement display module for FL & IR

SPXCDDM4 Replacement display module for RTD (4~20mA)

SPXCDDMR Replacement display module for RFD

SPXCDDMT12 Replacement O2 & Toxic display module Without Modbus for 12-32 Vdc

SPXCDDMF12 Replacement FL & IR display module Without Modbus for 12-32 Vdc

SPXCDDMTM12 Replacement O2 & Toxic display module with Modbus for 12-32 Vdc

SPXCDDMFM12 Replacement FL & IR display module with Modbus for 12-32 Vdc

SPXCDDMTM Replacement display module for O2 & Toxic with Modbus

SPXCDDMFM Replacement display module for FL & IR with Modbus

SPXCDDM4M Replacement display module for RTD with Modbus

SPXCDDMRM Replacement display module for RFD with Modbus

Spares (Replacement Terminal Module)

Each replacement terminal module includes pre-configured PCB (for sensor and range), terminals, screws, 'U' clamp, plastic cover and fixing screws.

SPXCDTMO Replacement terminal module for O2

SPXCDTMT Replacement terminal module for Toxic

SPXCDTMF Replacement terminal module for FL & IR

SPXCDTMO12 Replacement O2 terminal module for 12-32 Vdc

SPXCDTMT12 Replacement Toxic terminal module for 12-32 Vdc

SPXCDTMF12 Replacement FL & IR terminal module for 12-32 Vdc

SPXCDTM4 Replacement terminal module for RTD (4~20mA)

SPXCDTMR Replacement terminal module for RFD

Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only without MODBUS )

SPXCDALMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry

SPXCDALMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry

SPXCDALMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry

SPXCDASMTXO ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry

SPXCDASMTXT ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry

SPXCDASMTXF ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry

Spares (ATEX APPROVAL Replacement XCD STD version Transmitter only with MODBUS )

SPXCDALMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with LM25, M20 Entry

SPXCDALMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with LM25, M20 Entry

SPXCDALMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with LM25, M20 Entry

SPXCDASMTXOM ATEX/IECEX & AP approved SP XCD O2 Transmitter with SS316, M20 Entry

SPXCDASMTXTM ATEX/IECEX & AP approved SP XCD Toxic Transmitter with SS316, M20 Entry

SPXCDASMTXFM ATEX/IECEX & AP approved SP XCD FL/IR Transmitter with SS316, M20 Entry

Spares (UL APPROVAL Replacement XCD STD version Transmitter only without MODBUS )

SPXCDULNTXO UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry

SPXCDULNTXT UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry

SPXCDULNTXF UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry

SPXCDUSNTXO UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry

SPXCDUSNTXT UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry

SPXCDUSNTXF UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry

Spares (UL APPROVAL Replacement XCD STD version Transmitter only with MODBUS )

SPXCDULNTXOM UL approved SP XCD O2 Transmitter with LM25, 3/4"NPT Entry

SPXCDULNTXTM UL approved SP XCD Toxic Transmitter with LM25, 3/4"NPT Entry

SPXCDULNTXFM UL approved SP XCD FL/IR Transmitter with LM25, 3/4"NPT Entry

SPXCDUSNTXOM UL approved SP XCD O2 Transmitter with SS316, 3/4"NPT Entry

SPXCDUSNTXTM UL approved SP XCD Toxic Transmitter with SS316, 3/4"NPT Entry

SPXCDUSNTXFM UL approved SP XCD FL/IR Transmitter with SS316, 3/4"NPT Entry

Special Flammable Gas Calibrations

SPXCDSFGC1 Special Flammable Gas Calibration, 0-100%LEL

SPXCDSFGC2 Special Flammable Gas Calibration, 0-100%LEL

SPXCDSFGC3 Special Flammable Gas Calibration, 0-100%LEL

SPXCDSFGC4 Special Flammable Gas Calibration, 0-100%LEL

SPXCDSFGC5 Special Flammable Gas Calibration, 0-100%LEL

SPXCDSFGC6-H Special Flammable Gas Calibration, 0-100%LEL,6* - Hydrogen

SPXCDSFGC7 Special Flammable Gas Calibration, 0-100%LEL

SPXCDSFGC8 Special Flammable Gas Calibration, 0-100%LEL

Note: If no Special Flammable Gas Calibration part no. is included on PO, a Methane (6* calibration will be supplied)